Posts

2009 Koh Young KY-3020T 3D Solder Paste Inspection

Manufacturer:   Koh Young
Model:   KY-3020T
D.O.M.:   2009
Reference No.:  282LC

Specifications:

  • Full automatic KY-3020T packs superior Koh Young inspection technology into a compact, tabletop system
  • Delivers precise, accurate SPI results while offering portability, convenience, and value
  • Key Features
    • Tabletop
    • Portable
    • Flexible
    • Fully automatic inspection on every pad
  • Programs compatible with Koh Young’s in-line systems,
  • Inspection Items :
    • Volume
    • Area
    • Height
    • Offset
    • Bridging
    • Shape Deformity
    • Coplanarity

Click the images below for an enlarged view of the KOH YOUNG 3D Solder Paste Inspection System

Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

FAST response, within a hour or less.

    TestEquity Model 1007H Temperature/Humidity Chamber

    Manufacturer: TestEquity
    Model: 1007H
    Reference No.: 281LC
    Description: TestEquity Model 1007H Temperature/Humidity Chamber

    Model 1007H Temperature/Humidity Chamber Specifications:
     
    Temperature Range
    -73°C to +175°C
    Control Tolerance
    ±0.5°C (±0.2°C Typical) (Short-term variations measured at the control sensor after stabilization)
    Uniformity
    ±1°C (Variations throughout the chamber after stabilization)
     
    Humidity Range

    Standard Range: 10% to 95%
    (Limited by a 6°C dewpoint and maximum dry bulb of +85°C)

    With optional GN2 Purge or Dry Air Purge: 5% to 95%
    (Dry bulb range of +10°C to +85°C)

    Temp/Humidity Range

    NOTE: Ability to reach RH extremes may be limited by the humidity sensor accuracy. Low Dew Point conditions can only be achieved when starting with a clean, dry chamber.

    Control Tolerance
    ±3% RH (Short-term variations measured at the control sensor after stabilization)
    Display Resolution
    0.1% RH
    Humidity Sensor
    Dynamic capacitive type (no wet wicks required)

     

    Cool Down Transition Time* (uncontrolled humidity mode)
    Start Temp End Temp
    +23°C 0°C -40°C -55°C -65°C -73°C
    +23°C —– 4 min 18 min 25 min 33 min Ultimate
    +50°C 5 min 11 min 27 min 36 min 45 min Ultimate
    +85°C 13 min 20 min 37 min 47 min 55 min Ultimate
    +150°C 32 min 39 min 58 min 65 min 76 min Ultimate
     
    Heat Up Transition Time* (uncontrolled humidity mode)
    Start Temp End Temp
    +23°C +50°C +85°C +125°C +150°C +175°C
    +23°C —– 1.5 min 7 min 14 min 20 min 25 min
    0°C 1.5 min 3.5 min 13 min 20 min 23 min 31 min
    -40°C 6 min 11 min 17 min 24 min 30 min 35 min
    -55°C 8 min 13 min 19 min 26 min 32 min 37 min
    -65°C 10 min 14 min 21 min 28 min 34 min 39 min

    Rate Of Change
    To calculate rate of change for a particular condition, take the difference between the Start Temp and End Temp and divide by the Transition Time.
    Cool Down Example: From +50°C to -40°C = 90°C / 27 min = 3.33°C/min.
    Heat Up Example: From -40°C to +50°C = 90°C / 11 min = 8.18°C/min.

    *Note: Transition times are measured after a 2 hour soak at the respective start temperature with an empty chamber, as indicated on the temperature controller, 23°C ambient. Measured with setpoint beyond the start and end temperatures. Does not include the effect of proportional band when approaching setpoint. Performance is reduced by 17% with 50 Hz input power.

     

    Live Load Capacity (uncontrolled humidity mode)
    +23°C 0°C -40°C -55°C -65°C
    1,000 Watts 800 Watts 500 Watts 400 Watts 300 Watts

     

    Refrigeration and Heating System
    High Stage Refrigerant R-404A (Dupont HP-62)
    Low Stage Refrigerant R-508B (Dupont SUVA-95)
    Compressors 1.5 HP x 1.5 HP Tecumseh hermetic compressors in a cascade configuration.
    Condenser Air Cooled
    Heat of Rejection 14,800 BTUH (maximum rated chamber load at maximum cooling rate from high temperature soak)
    Air Heater Power 2,000 Watts
    Humidifier Heater Power 1,500 Watts (rating at 240V)
    Air Flow 450 cfm

     

    Instrumentation
    Temperature Controller Watlow F4T Touch Screen Controller with RS-232, Ethernet interface, 4.3″ color graphic touch screen. OR…
    Watlow F4 Controller with RS-232 interface, LED readout of temperature, LCD display of other parameters.
    Limit Controller Independent high and low temperature limits. Triggers an audible alarm and shuts down the chamber. Relay contacts provide a safety power interlock for test sample.
    Chart Recorder (Optional) Honeywell DR4300 Series. One pen, 10″ circular chart. Mounts in lower front door. Honeywell Chart Recorder

     

    Input Power Requirements
      Phase Current Draw Minimum Service
    230 V ±10%, 60 Hz 1 PH 25 A 30 A
    3 PH 19 A 25 A
     
    208 V -5/+10%, 60 Hz 1 PH 28 A 35 A
    3 PH 21 A 30 A

    Input may be configured for single or three phase in the field by changing jumpers. Three phase load is semi-balanced. Call for other voltages or 50 Hz operation. Performance is reduced by 17% at 50 Hz.

    Customer power source must be hard-wired to the chamber by a qualified electrician. Power cord and plug is not included.

     

    Humidity Water Requirements
    Supply and Drain Must be provided with a water line and floor drain. Negligible consumption.
    Water Recirculation System (optional) Provides a reliable supply of filtered water for the humidity system. Perfect for installations where a water line and drain are not available.

     

    Physical Characteristics and Safety
    Inside Dimensions 24″ W x 21″ H x 24″ D (7 cubic feet)
    609 mm W x 533 mm H x 609 mm D (198 liters)
    Outside Dimensions 33″ W x 68.75″ H x 54″ D (nominal)
    838 mm W x 1746 mm H x 1372 mm D
    Door latch adds 3″ to width on right side (may be removed to permit move-in through a 36″ doorway). Circulator motor and housing adds 6″ to height.
    Minimum Installed Clearance 18″ from the left and right side
    24″ from the rear
    Window Viewing Area 13.375″ W x 9″ H
    Access Ports 4″ Port on left and right side (two total)
    Supplied with foam plugs
    Weight Chamber Weight: 890 pounds
    Shipping Weight: 1,058 pounds
    Sound Level 62 dBA in cooling mode (A-weighted, measured 36″ from the front or side surface, 63″ from the floor, in a free-standing environment)

    NOTE: Performance is typical and based on operation at 23°C (73°F) ambient and nominal input voltage. Designed for use in a normal conditioned laboratory. Operation at higher ambient temperatures may result in decreased cooling performance. Additional ports and shelves will also affect performance. Operation above 30°C (85°F) or below 16°C (60°F) ambient is not recommended.

    Contact SMT Sales Group for additional details.

    Condition: Complete & Operational
    Availability:  Immediate for purchase / 2-4 weeks for shipping
    Location & Shipping:  USA / FOB Origin
    Actual Machine Photos:

    Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

    FAST response, within an hour or less.

      TestEquity Model 1027S Temperature Chamber

      Manufacturer: TestEquity
      Model: 1027S
      Reference No.: 280LC
      Description: TestEquity Model 1027S Temperature Chamber

      Model 1027S Temperature Chamber Specifications:

      Temperature Range
      -35°C to +175°C
      Control Tolerance
      ±0.5°C (Short-term variations measured at the control sensor after stabilization)
      Uniformity
      ±1.0°C (Variations throughout the chamber after stabilization)

       

      Cool Down Transition Time (empty)*
      Start Temp End Temp
      +23°C 0°C -10°C -20°C -30°C -35°C
      +150°C 9.0 min 14 min 17 min 20 min 26 min Ultimate
      +85°C 4.0 min 7.5 min 10 min 13 min 19 min
      +23°C —– 1 min 2 min 4 min 9 min
      Cool Down Transition Time (with 80 lb. aluminum load)*
      Start Temp End Temp
      +23°C 0°C -10°C -20°C -30°C -35°C
      +150°C 20.0 min 28 min 33 min 38 min 46 min Ultimate
      +85°C 8.0 min 16 min 20 min 25 min 33 min
      Heat Up Transition Time (empty)*
      Start Temp End Temp
      +23°C +50°C +85°C +125°C +150°C +175°C
      +23°C —– 1.5 min 7 min 14 min 20 min 25 min
      0°C 1.5 min 3.5 min 13 min 20 min 23 min 31 min
      -10°C 2.2 min 4.2 min 14 min 22 min 25 min 33 min
      -35°C 5.5 min 10 min 16 min 23 min 29 min 34 min
      Heat Up Transition Time (with 80 lb. aluminum load)*
      Start Temp End Temp
      +23°C +50°C +85°C +125°C +150°C +175°C
      0°C 5 min 13 min 23 min 36 min 45 min 55 min
      -35°C 11 min 19 min 29 min 42 min 51 min 61 min

      Rate Of Change
      To calculate rate of change for a particular condition, take the difference between the Start Temp and End Temp and divide by the Transition Time.
      Cool Down Example (empty): From +85°C to 0°C = 85°C / 7.5 min = 11.3°C/min.
      Cool Down Example (with 80 lb. load): From +85°C to 0°C = 85°C / 16 min = 5.3°C/min.
      Heat Up Example (empty): From 0°C to +85°C = 85°C / 13 min = 6.5°C/min.
      Heat Up Example (with 80 lb. load): From 0°C to +85°C = 85°C / 23 min = 3.7°C/min.

      *Note: Transition times are measured after a 2 hour soak at the respective start temperature with an empty chamber, as indicated on the temperature controller, 23°C ambient. Measured with setpoint beyond the start and end temperatures. Does not include the effect of proportional band when approaching setpoint. Performance is reduced by 17% with 50 Hz input power.

      Live Load Capacity

      +23°C 0°C -10°C -20°C -30°C
      4,000 Watts 2,800 Watts 2,300 Watts 1,800 Watts 1,250 Watts

      Refrigeration and Heating System

      Refrigerant R-404A (Dupont HP-62)
      Compressors 3.5 HP Copeland scroll compressor. More about Scroll Compressors >>
      Condenser Air Cooled
      Heat of Rejection 30,200 BTUH (maximum rated chamber load at maximum cooling rate from high temperature soak)
      Heater Power 4,000 Watts @ 208 V input
      Air Flow 830 cfm

      Instrumentation

      Temperature Controller Watlow F4T Touch Screen Controller with RS-232, Ethernet interface, 4.3″ color graphic touch screen. OR…
      Watlow F4 Controller with RS-232 interface, LED readout of temperature, LCD display of other parameters.
      Limit Controller Independent high and low temperature limits. Triggers an audible alarm and shuts down the chamber. Relay contacts provide a safety power interlock for test sample.
      Chart Recorder (Optional) Honeywell DR4300 Series. One pen, 10″ circular chart. Mounts in lower front door.

      Input Power Requirements

      230 V ±10%, 60 Hz, 3 Phase Max Current Draw 31 A; Recommended Service 40 A
      208 V -5/+10%, 60 Hz, 3 Phase Max Current Draw 26 A; Recommended Service 35 A
        Input may be configured for 230 V or 208 V in the field by changing jumpers. Three phase load is balanced. Call for other voltages or 50 Hz operation.

      Customer power source must be hard-wired to the chamber by a qualified electrician. Power cord and plug is not included.

      Physical Characteristics and Safety

      Inside Dimensions 40″ W x 32″ H x 36.5″ D (27 cubic feet)
      1016 mm W x 812.8 mm H x 927 mm D (764 liters)
      Outside Dimensions 49″ W x 73.25″ H x 63″ D (nominal)
      1244 mm W x 1860 mm H x 1600 mm D
      Door latch adds 3″ to width on right side. Circulator motor and housing adds 6″ to height – may be removed for move-in.
      Minimum Installed Clearance 18″ from the left and right side
      24″ from the rear
      Window Viewing Area 16″ W x 13″ H
      Access Ports 4″ Port on left and right side (two total)
      Supplied with foam plugs
      Weight Chamber Weight: 1,410 pounds
      Shipping Weight: 1,595 pounds

      NOTE: Performance is typical and based on operation at 23°C (73°F) ambient and nominal input voltage. Designed for use in a normal conditioned laboratory. Operation at higher ambient temperatures may result in decreased cooling performance. Additional ports and shelves will also affect performance. Operation above 30°C (85°F) or below 16°C (60°F) ambient is not recommended. Performance is reduced by 17% with 50 Hz input power.

      Due to continuous product improvements, specifications subject to change without notice.

      Contact SMT Sales Group for additional details.

      Condition: Complete & Operational
      Availability:  Immediate for purchase / 2-4 weeks for shipping
      Location & Shipping:  USA / FOB Origin
      Actual Machine Photos:

      Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

      FAST response, within an hour or less.

        Simplimatic 3101L Wave Solder Pallet Return System

        Manufacturer: Simplimatic
        Model: 3101L
        DOM: 2011
        Serial No: M261670
        Reference No.:   279LC
        Description: Simplimatic 3101L Wave Solder Pallet Return System.

        This is a pallet return system that consists of several parts.
        (2) elevators or a lift and lowerator.   Main two pieces in the picture.  Then there is the motor that runs the conveyor that goes over the top of the work area.

         

        Contact SMT Sales Group for additional details.

        Condition: Complete & Operational
        Availability:  Immediate for purchase / 2-4 weeks for shipping
        Location & Shipping:  USA / FOB Origin
        Actual Machine Photos:

        Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

        FAST response, within an hour or less.

          Simplimatic Traversing/Side Shuttle Conveyor

          Manufacturer: Simplimatic
          Model: Traversing/Side Shuttle Conveyor
          Reference No.:   278LC
          Description: Simplimatic Traversing/Side Shuttle Conveyor

          Contact SMT Sales Group for additional details.

          Condition: Complete & Operational
          Availability:  Immediate for purchase / 2-4 weeks for shipping
          Location & Shipping:  USA / FOB Origin
          Actual Machine Photos:

          Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

          FAST response, within an hour or less.

            Simplimatic Wave Entrance Conveyor

            Manufacturer: Simplimatic
            Model: Entrance Conveyor
            Reference No.:   277LC
            Description: Simplimatic Wave Entrance Conveyor
            This conveyor is a drop and tilt wave entrance conveyor.

            Contact SMT Sales Group for additional details.

            Condition: Complete & Operational
            Availability:  Immediate for purchase / 2-4 weeks for shipping
            Location & Shipping:  USA / FOB Origin
            Actual Machine Photos:

            Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

            FAST response, within an hour or less.

              Simplimatic 3012 Wave Exit Conveyor (2 pieces)

              Manufacturer: Simplimatic
              Model: 3012
              Reference No.:   276LC
              Serial No: M250240
              Description: Simplimatic Wave Exit Conveyor (2 pieces).
              This is a very high-wave exit conveyor (2 pieces).  The first part is actually the wave exit with Collings fans.  From there it goes into an elevator that lowers the boards back down to line-height.

              Contact SMT Sales Group for additional details.

              Condition: Complete & Operational
              Availability:  Immediate for purchase / 2-4 weeks for shipping
              Location & Shipping:  USA / FOB Origin
              Actual Machine Photos:

              Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

              FAST response, within an hour or less.

                Simplimatic Accumulating Edge Roller Conveyor

                Manufacturer: Simplimatic
                Model: Accumulating Roller Conveyor
                Reference No.:   275LC
                Description: Simplimatic Accumulating Edge Roller Conveyor. 

                Contact SMT Sales Group for additional details.

                Condition: Complete & Operational
                Availability:  Immediate for purchase / 2-4 weeks for shipping
                Location & Shipping:  USA / FOB Origin
                Actual Machine Photos:

                Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

                FAST response, within an hour or less.

                  CTI 90 Degree Turn Conveyor

                  Manufacturer: CTI
                  Model: 90 Degree Turn Conveyor
                  Reference No.:   274LC
                  Description: CTI 90 Degree Turn Conveyor

                  Contact SMT Sales Group for additional details.

                  Condition: Complete & Operational
                  Availability:  Immediate for purchase / 2-4 weeks for shipping
                  Location & Shipping:  USA / FOB Origin
                  Actual Machine Photos:

                  Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

                  FAST response, within an hour or less.

                    Conveyor Technologies Shuttle Gate Inline Conveyor

                    Manufacturer: Conveyor Technologies
                    Model: 1 Meter Workstation Conveyor
                    Reference No.:   273LC
                    Description: Conveyor Technologies Shuttle Gate Inline Conveyor

                    Contact SMT Sales Group for additional details.

                    Condition:  Complete & Operational
                    Availability:  Immediate for purchase / 2-4 weeks for shipping
                    Location & Shipping:  USA / FOB Origin
                    Actual Machine Photos:

                    Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

                    FAST response, within an hour or less.