Posts

2011 Focalspot 130 X-Ray

Manufacturer: Focalspot
Model: 130
DOM: 2011
Reference No.:  316L

Data Sheet

Specifications:

  • Focalspot 130 X-Ray
  • Please contact SMT Sales Group for additional information

Click the images below for additional views.

Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

FAST response, within an hour or less.

Rhode & Schwarz S-Line Chamber

Manufacturer: Rhode & Schwarz
Model: S-Line Chamber
Reference No.:  314C

  • Rhode & Schwarz S-Line Chamber
  • Please contact SMT Sales Group for additional information

Click the images below for additional views.

Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

FAST response, within an hour or less.

2019 Hentec RPS Vector 460 Selective Soldering Machine

Manufacturer: Hentec RPS
Model: Vector 460
Reference No.:  313L

Hentec RPS Vector 460 Selective Soldering Machine Specifications:

  • High performance selective soldering machine with two multi-nozzles
  • Process range of 18” x 18”
  • Perfect for mid-volume production
  • Please contact SMT Sales Group for additional information

Vector 460 Spec Sheet

Click the images below for additional views.

Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

FAST response, within an hour or less.

YJ LINK ADRC‐50 X PCB Cleaner

Manufacturer: YJ LINK 
Model: ADRC‐50 X PCB Cleaner
Reference No.:  311L

Specifications:

YJ LINK ADRC‐50 X PCB Cleaner Specs

  • Fume Collector
  • Ionizer
  • Sticky Rolle
  • PCB Size. 530 X 375
  • Transport Height 950mm±20mm / 900mm±20mm Color EX8816(S)‐SR‐WH020 (KCC)
  • Flow direction Left to Right / Right to Left Fixed rail Front / Rear
  • Conveyor speed 200mm/min.
  • Conveyor belt Antistatic 1010~12 Tem: 70˚ PCB Thickness 0.5T ~ 5T
  • PCB edge 3mm Interface SMEMA PLC PANASONIC
  • Air supply 0.5Mpa(5bar) Power 0.3Kw(110~240V/50~60Hz)
  • 1Phase
  • Please contact SMT Sales Group for additional information

Click the images below for additional views.

Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

FAST response, within an hour or less.

Simplimatic End Of The Line Loader

Manufacturer: Simplimatic
Model: End of the line multiage loader
Reference No.:  310L

Specifications:

  • Simplimatic End Of The Line Multiage Loader
  • Please contact SMT Sales Group for additional information

Click the images below for additional views.

Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

FAST response, within an hour or less.

iLINK End Of The Line Loader

Manufacturer: iLINK
Model: End of the line loader
Reference No.:  309L

Specifications:

  • iLINK End Of The Line Loader
  • Please contact SMT Sales Group for additional information

Click the images below for additional views.

Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

FAST response, within an hour or less.

2015 Vi Technology 5K SPECTRO 2D AOI

Manufacturer: Vi Technology
Model: 5K SPECTRO 2D AOI
D.O.M.:   2015
S/N: 1506A1168
Reference No.:  305L

Specifications:

5K-Spectro Automated Optical Inspection System

  • Precision XY gantry
  • High-speed linear motors with closed-loop high-resolution linear encoders
  • Motorized conveyor width adjustment for boards up to 355 mm x 355 mm (21″ x 24″)
  • High-resolution & High-speed digital camera with 3232 x 2372 pixels – with 4.75 μm inspection resolution
  • Custom design ultra-low distortion Telecentric lens
  • Powered by SPECTRO: ViTechnology’s  new Illumination System with white axial and Tri-color peripheral high intensity LED
  • PC Intel Core I5 quad-core, 4 GB RAM, with 22 ” LCD monitor
  • Vision 64 software suite using Windows 7/64bit operating system including”
    – Synthetic model library powered by Vectoral Imaging
    – Vi-501 component inspection software, XY & Theta presence, absence, and polarity
    – Vi-530 Profiler tool (solder joint inspection & lifted lead detection)
    – OCV (Optical Character Verification)
    – MatchMaker tool for fast program creation
    – Supervisor database (for installation on customer server)
    – Library Pro for inspection quality insurance
    – Library Live update
    – Teach & Tune Assist
    – Left to left conveying capability
    – PCBRecorder tool for panel image bank recording
  • Electronic user manual
  • Call with any questions

Click the images below for additional views.

Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

FAST response, within an hour or less.

    2006 Speedline MPM MOMENTUM UP2000 HiE

    Manufacturer:  Speedline MPM
    Model:  MOMENTUM UP2000 HiE
    D.O.M.:   2006
    S/N: 23539
    Reference No.:  304L

    Specifications:

    • Print Area 18″ x 16″ (457 x 406mm)
    • User-friendly software maximizes uptime
    • Alignment Accuracy: +/- 0.001″ at 6 sigma, and cycle time of less than 11 seconds
    • Advanced vision algorithms quickly process fiducials “On-the-Move” for efficient image capture
    • Self leveling print head allows squeegee pressure, print speed and down stop to be independently adjusted for both front and rear squeegee blades for optimal print quality.

    DATASHEET

    Click the images below for additional views.

    Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

    FAST response, within an hour or less.

      TestEquity Model 1007H Temperature/Humidity Chamber

      Manufacturer: TestEquity
      Model: 1007H
      Reference No.: 281LC
      Description: TestEquity Model 1007H Temperature/Humidity Chamber

      Model 1007H Temperature/Humidity Chamber Specifications:
       
      Temperature Range
      -73°C to +175°C
      Control Tolerance
      ±0.5°C (±0.2°C Typical) (Short-term variations measured at the control sensor after stabilization)
      Uniformity
      ±1°C (Variations throughout the chamber after stabilization)
       
      Humidity Range

      Standard Range: 10% to 95%
      (Limited by a 6°C dewpoint and maximum dry bulb of +85°C)

      With optional GN2 Purge or Dry Air Purge: 5% to 95%
      (Dry bulb range of +10°C to +85°C)

      Temp/Humidity Range

      NOTE: Ability to reach RH extremes may be limited by the humidity sensor accuracy. Low Dew Point conditions can only be achieved when starting with a clean, dry chamber.

      Control Tolerance
      ±3% RH (Short-term variations measured at the control sensor after stabilization)
      Display Resolution
      0.1% RH
      Humidity Sensor
      Dynamic capacitive type (no wet wicks required)

       

      Cool Down Transition Time* (uncontrolled humidity mode)
      Start Temp End Temp
      +23°C 0°C -40°C -55°C -65°C -73°C
      +23°C —– 4 min 18 min 25 min 33 min Ultimate
      +50°C 5 min 11 min 27 min 36 min 45 min Ultimate
      +85°C 13 min 20 min 37 min 47 min 55 min Ultimate
      +150°C 32 min 39 min 58 min 65 min 76 min Ultimate
       
      Heat Up Transition Time* (uncontrolled humidity mode)
      Start Temp End Temp
      +23°C +50°C +85°C +125°C +150°C +175°C
      +23°C —– 1.5 min 7 min 14 min 20 min 25 min
      0°C 1.5 min 3.5 min 13 min 20 min 23 min 31 min
      -40°C 6 min 11 min 17 min 24 min 30 min 35 min
      -55°C 8 min 13 min 19 min 26 min 32 min 37 min
      -65°C 10 min 14 min 21 min 28 min 34 min 39 min

      Rate Of Change
      To calculate rate of change for a particular condition, take the difference between the Start Temp and End Temp and divide by the Transition Time.
      Cool Down Example: From +50°C to -40°C = 90°C / 27 min = 3.33°C/min.
      Heat Up Example: From -40°C to +50°C = 90°C / 11 min = 8.18°C/min.

      *Note: Transition times are measured after a 2 hour soak at the respective start temperature with an empty chamber, as indicated on the temperature controller, 23°C ambient. Measured with setpoint beyond the start and end temperatures. Does not include the effect of proportional band when approaching setpoint. Performance is reduced by 17% with 50 Hz input power.

       

      Live Load Capacity (uncontrolled humidity mode)
      +23°C 0°C -40°C -55°C -65°C
      1,000 Watts 800 Watts 500 Watts 400 Watts 300 Watts

       

      Refrigeration and Heating System
      High Stage Refrigerant R-404A (Dupont HP-62)
      Low Stage Refrigerant R-508B (Dupont SUVA-95)
      Compressors 1.5 HP x 1.5 HP Tecumseh hermetic compressors in a cascade configuration.
      Condenser Air Cooled
      Heat of Rejection 14,800 BTUH (maximum rated chamber load at maximum cooling rate from high temperature soak)
      Air Heater Power 2,000 Watts
      Humidifier Heater Power 1,500 Watts (rating at 240V)
      Air Flow 450 cfm

       

      Instrumentation
      Temperature Controller Watlow F4T Touch Screen Controller with RS-232, Ethernet interface, 4.3″ color graphic touch screen. OR…
      Watlow F4 Controller with RS-232 interface, LED readout of temperature, LCD display of other parameters.
      Limit Controller Independent high and low temperature limits. Triggers an audible alarm and shuts down the chamber. Relay contacts provide a safety power interlock for test sample.
      Chart Recorder (Optional) Honeywell DR4300 Series. One pen, 10″ circular chart. Mounts in lower front door. Honeywell Chart Recorder

       

      Input Power Requirements
        Phase Current Draw Minimum Service
      230 V ±10%, 60 Hz 1 PH 25 A 30 A
      3 PH 19 A 25 A
       
      208 V -5/+10%, 60 Hz 1 PH 28 A 35 A
      3 PH 21 A 30 A

      Input may be configured for single or three phase in the field by changing jumpers. Three phase load is semi-balanced. Call for other voltages or 50 Hz operation. Performance is reduced by 17% at 50 Hz.

      Customer power source must be hard-wired to the chamber by a qualified electrician. Power cord and plug is not included.

       

      Humidity Water Requirements
      Supply and Drain Must be provided with a water line and floor drain. Negligible consumption.
      Water Recirculation System (optional) Provides a reliable supply of filtered water for the humidity system. Perfect for installations where a water line and drain are not available.

       

      Physical Characteristics and Safety
      Inside Dimensions 24″ W x 21″ H x 24″ D (7 cubic feet)
      609 mm W x 533 mm H x 609 mm D (198 liters)
      Outside Dimensions 33″ W x 68.75″ H x 54″ D (nominal)
      838 mm W x 1746 mm H x 1372 mm D
      Door latch adds 3″ to width on right side (may be removed to permit move-in through a 36″ doorway). Circulator motor and housing adds 6″ to height.
      Minimum Installed Clearance 18″ from the left and right side
      24″ from the rear
      Window Viewing Area 13.375″ W x 9″ H
      Access Ports 4″ Port on left and right side (two total)
      Supplied with foam plugs
      Weight Chamber Weight: 890 pounds
      Shipping Weight: 1,058 pounds
      Sound Level 62 dBA in cooling mode (A-weighted, measured 36″ from the front or side surface, 63″ from the floor, in a free-standing environment)

      NOTE: Performance is typical and based on operation at 23°C (73°F) ambient and nominal input voltage. Designed for use in a normal conditioned laboratory. Operation at higher ambient temperatures may result in decreased cooling performance. Additional ports and shelves will also affect performance. Operation above 30°C (85°F) or below 16°C (60°F) ambient is not recommended.

      Contact SMT Sales Group for additional details.

      Condition: Complete & Operational
      Availability:  Immediate for purchase / 2-4 weeks for shipping
      Location & Shipping:  USA / FOB Origin
      Actual Machine Photos:

      Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

      FAST response, within an hour or less.

        TestEquity Model 1027S Temperature Chamber

        Manufacturer: TestEquity
        Model: 1027S
        Reference No.: 280LC
        Description: TestEquity Model 1027S Temperature Chamber

        Model 1027S Temperature Chamber Specifications:

        Temperature Range
        -35°C to +175°C
        Control Tolerance
        ±0.5°C (Short-term variations measured at the control sensor after stabilization)
        Uniformity
        ±1.0°C (Variations throughout the chamber after stabilization)

         

        Cool Down Transition Time (empty)*
        Start Temp End Temp
        +23°C 0°C -10°C -20°C -30°C -35°C
        +150°C 9.0 min 14 min 17 min 20 min 26 min Ultimate
        +85°C 4.0 min 7.5 min 10 min 13 min 19 min
        +23°C —– 1 min 2 min 4 min 9 min
        Cool Down Transition Time (with 80 lb. aluminum load)*
        Start Temp End Temp
        +23°C 0°C -10°C -20°C -30°C -35°C
        +150°C 20.0 min 28 min 33 min 38 min 46 min Ultimate
        +85°C 8.0 min 16 min 20 min 25 min 33 min
        Heat Up Transition Time (empty)*
        Start Temp End Temp
        +23°C +50°C +85°C +125°C +150°C +175°C
        +23°C —– 1.5 min 7 min 14 min 20 min 25 min
        0°C 1.5 min 3.5 min 13 min 20 min 23 min 31 min
        -10°C 2.2 min 4.2 min 14 min 22 min 25 min 33 min
        -35°C 5.5 min 10 min 16 min 23 min 29 min 34 min
        Heat Up Transition Time (with 80 lb. aluminum load)*
        Start Temp End Temp
        +23°C +50°C +85°C +125°C +150°C +175°C
        0°C 5 min 13 min 23 min 36 min 45 min 55 min
        -35°C 11 min 19 min 29 min 42 min 51 min 61 min

        Rate Of Change
        To calculate rate of change for a particular condition, take the difference between the Start Temp and End Temp and divide by the Transition Time.
        Cool Down Example (empty): From +85°C to 0°C = 85°C / 7.5 min = 11.3°C/min.
        Cool Down Example (with 80 lb. load): From +85°C to 0°C = 85°C / 16 min = 5.3°C/min.
        Heat Up Example (empty): From 0°C to +85°C = 85°C / 13 min = 6.5°C/min.
        Heat Up Example (with 80 lb. load): From 0°C to +85°C = 85°C / 23 min = 3.7°C/min.

        *Note: Transition times are measured after a 2 hour soak at the respective start temperature with an empty chamber, as indicated on the temperature controller, 23°C ambient. Measured with setpoint beyond the start and end temperatures. Does not include the effect of proportional band when approaching setpoint. Performance is reduced by 17% with 50 Hz input power.

        Live Load Capacity

        +23°C 0°C -10°C -20°C -30°C
        4,000 Watts 2,800 Watts 2,300 Watts 1,800 Watts 1,250 Watts

        Refrigeration and Heating System

        Refrigerant R-404A (Dupont HP-62)
        Compressors 3.5 HP Copeland scroll compressor. More about Scroll Compressors >>
        Condenser Air Cooled
        Heat of Rejection 30,200 BTUH (maximum rated chamber load at maximum cooling rate from high temperature soak)
        Heater Power 4,000 Watts @ 208 V input
        Air Flow 830 cfm

        Instrumentation

        Temperature Controller Watlow F4T Touch Screen Controller with RS-232, Ethernet interface, 4.3″ color graphic touch screen. OR…
        Watlow F4 Controller with RS-232 interface, LED readout of temperature, LCD display of other parameters.
        Limit Controller Independent high and low temperature limits. Triggers an audible alarm and shuts down the chamber. Relay contacts provide a safety power interlock for test sample.
        Chart Recorder (Optional) Honeywell DR4300 Series. One pen, 10″ circular chart. Mounts in lower front door.

        Input Power Requirements

        230 V ±10%, 60 Hz, 3 Phase Max Current Draw 31 A; Recommended Service 40 A
        208 V -5/+10%, 60 Hz, 3 Phase Max Current Draw 26 A; Recommended Service 35 A
          Input may be configured for 230 V or 208 V in the field by changing jumpers. Three phase load is balanced. Call for other voltages or 50 Hz operation.

        Customer power source must be hard-wired to the chamber by a qualified electrician. Power cord and plug is not included.

        Physical Characteristics and Safety

        Inside Dimensions 40″ W x 32″ H x 36.5″ D (27 cubic feet)
        1016 mm W x 812.8 mm H x 927 mm D (764 liters)
        Outside Dimensions 49″ W x 73.25″ H x 63″ D (nominal)
        1244 mm W x 1860 mm H x 1600 mm D
        Door latch adds 3″ to width on right side. Circulator motor and housing adds 6″ to height – may be removed for move-in.
        Minimum Installed Clearance 18″ from the left and right side
        24″ from the rear
        Window Viewing Area 16″ W x 13″ H
        Access Ports 4″ Port on left and right side (two total)
        Supplied with foam plugs
        Weight Chamber Weight: 1,410 pounds
        Shipping Weight: 1,595 pounds

        NOTE: Performance is typical and based on operation at 23°C (73°F) ambient and nominal input voltage. Designed for use in a normal conditioned laboratory. Operation at higher ambient temperatures may result in decreased cooling performance. Additional ports and shelves will also affect performance. Operation above 30°C (85°F) or below 16°C (60°F) ambient is not recommended. Performance is reduced by 17% with 50 Hz input power.

        Due to continuous product improvements, specifications subject to change without notice.

        Contact SMT Sales Group for additional details.

        Condition: Complete & Operational
        Availability:  Immediate for purchase / 2-4 weeks for shipping
        Location & Shipping:  USA / FOB Origin
        Actual Machine Photos:

        Contact SMT Sales Group using the form below or email sales@smtsalesgroup.com for additional information or inquiries.

        FAST response, within an hour or less.